2-sided hanging ‘blade’ sign. Letters and logo are 1/16″ cnc laser-cut stainless steel that’s been sanded or ‘grained’ horizontally. They’re adhered to birch plywood w/a black aniline dye. Aniline dyes are what luthiers use to color wooden instruments and are…
Sign is 8′ x 8′ x 10″ thick with lots of fun dimension. Carved HDU is gilded in aluminum leaf. The perforated black background has holes that color-shift between orange and blue as you move by.
Sign is 3′ wide x 10′ high and 25″ thick at the top. Two dimensional halves are bolted together around an existing pole. It used to support a neon sign for the old roller rink that was originally there. The…
Letters are 1/4″ aluminum, water-jet cut and anodized clear. They’re attached to a laser-cut & powder-coated steel panel. This panel is backed by a wood panel of 2×6’s. There’s 3 lengths of all-thread running horizontally through the boards to hold…
Posts and header are 10″ x 10″ cedar; notched and attached with screwed plates. Sign panel background is made of cedar 2×6’s bolted together, no glue. Bolts go through the front steel panel to the hanger straps where the backside…
Letters are cnc laser-cut from 1/4″ steel and powder-coated black. They’re attached to a beautiful length of clear vertical grain doug fir. The board has been coated with a dozen plus applications of Dalys’ Seafin Teak Oil, with has a…
Steel is real! Three stacked layers are all laser-cut steel. Bottom and top layers are mild steel and powder-coated. The middle layer is stainless for a subtle dose of bling. Lettering around perimeter is vinyl. Was a fun design process…
All the parts of this sign are laser-cut from 1/4″ aluminum. The background has a pattern of triangles, reinforcing the triangle backing of the logo, that has been sandblasted into the aluminum, then anodized clear. The letters and far backing…
All the logo parts, lettering and border are cnc router-cut from 2″ thick panels of HDU (high density urethane). All corners are radiused with a portable hand router. After extensive prep work, the logo and letters are gilded is 23K…
White acrylic ‘push through’ letters illuminate from strips of LED’s. Letters are glued to an outline of cnc laser-cut stainless steel. This stainless unit is tabbed into slots in the aluminum background. The 1/4″ plate aluminum back is also laser-cut.…