Letters are airbrushed and background blended with a big automotive spray gun. Lots of custom paint with an automotive clear on top. 2, 1/2″ MDO plywood panels butt together at the middle. Star is laser-cut aluminum, airbrushed and cleared as…
Swooshes are cnc router-cut from 2″ thick HDU, painted with 1-Shot enamel. Logo is my design work and cnc router-cut from black ACM. Background of copper has been disc sanded w/a mini grinder methodically in 2″ lines and cleared. Welded…
This group added a new attorney and wondered if their existing aluminum letters could be still used somehow. They were very tired looking, filthy, heavily oxidized and pitted. I sanded the top surface and wire brushed the sides on a…
Logo is cut out of 3/16″ steel w/a cnc laser. Then chemically ‘blackened’ w/a ragged on liquid treatment.
Polished 1/8″ stainless steel letters are cnc laser-cut and mounted to a panel of black matte finish ACM.
Letters are cnc laser-cut from 1/2″ (top line) and 1/4″ (bottom line) black acrylic. The laser creates a very polished ‘wet ice cube’ look on the edges. The curved panel is flexed stainless steel. It’s attached to a welded 1″…
Letters are cnc router cut from a PVC board. The background board is MDO plywood. All paint is 1-Shot lettering enamel. The lavender colored floral design at the bottom is painted using vinyl cut paint mask. My signature is embedded…
The letters are modified from a beautiful typeface. The crossbars on the A’s and the tail on the Q were rebuilt (re-designed). The letters are cnc carved out of high density urethane (HDU) in 3 dimensions on an XYZ axis…
Sign background exceeds 48″ in both directions by criss-crossing 2 sheets of MDO plywood. Double stacked raised dimensional letters and parts are cnc router cutout from 1/2″ PVC board. Posts are p.t. 6×6’s, skinned in cedar 1×8, capped with cedar…